Check back regularly or subscribe for updates. Email us at jandkaudiodesign@gmail.com, or fill in the form on the left.

Tuesday, May 9, 2017

Ultra Isolation Power Transformer

If you want to improve your equipment sound further and do not know where to work on further, look here! Introducing our... 9th Gen Level 3 power transformers!

Due to the weak economy (We have not seen good economy before for quite some time! Is such thing as good economy ever exists?) , we have been releasing a few lines of economical, good value for money transformers, such as the Zorro transformers

Still, our passion, our motto, is still to produce the best possible transformers for audio and industrial use. Our transformers have undergone many generations of evolution (9th generation now if we think of significant improvements. Minor improvements are not accounted), and is getting better, and better, in terms of reliability, mechanical and sound quality.

The 9th Generation Level 3 power transformers now incorporates ultra isolation properties, with the same electrical properties that are available in our ultra isolation transformers (refer this link for more details). 

9th Gen Level 3 power transformers properties:
* high quality ultra low loss GOSS (grain oriented silicon steel) / SiFe transformer core (Hi-B) with high quality OFC magnet wire
* oversized core with fully rated output power and more!
* low temperature rise, no mechanical vibration/hum - additional mu-metal shielding at small cost increment 
* high accuracy in output voltage - further improved from previous - ability to specify the target voltage over the oversized rating for better voltage control 
* Precision Wind Technology, with proper wire tension/alignment 
* Multi-shield Technology - primary ground and secondary ground, and can be separated
* Potting is recommended for further mechanical stability and electrical isolation 
* OCC (Ohno Continuous Cast) Copper option is available (~60-80% more expensive)
* OCC Silver option is available too (>300% more expensive) for highest end customer
* bifiliar wound for absolute balance on both arms - or balance power 
* Efficient heat transfer technology, for 24 by 7 operation 
* Vacuum impregnation - standard feature 
* Double C core option for certain VA sizes 

Options / notes:
* multiple primaries can be present at the same time - from 100Va to 260Vac, depends on user's mains voltage, so that they can switch according to incoming level, and adjust the output voltage accordingly 
* Output rails limitation - 5 or 6 sets max, the lesser the better
* Multitap shielding - shielding in between secondaries
* Option to lower current density and flux density to operate transformer at ease
* Lead time may be longer due to the amount of work required to get it right - if you cannot wait, please order from others 

User will notice the darker background, noise free and cleaner sound that they get from Gen9 Level 3 power transformers - benefit from pure, clean, EMI/RFI interference free energy transfer. The only drawback to Gen9 Level 3 power transformer is the size. A 100VA transformer will be as large as a 200VA transformer due to the construction methodology. There is NOTHING (or very little thing) we can do about the size. Contact us to see if there are other options on sizes. That's the price to pay for quality.

One more thing, if you want the best, extreme high quality transformers, you want your design to sound way much better than the rest of the world, look here, and don't complain about the price.. We put all the goodies in to the design, and they never come cheap. Just like you don't expect hawker price on Patek watches. If budget is a great concern to you, get the Zorro or Level 0-1 transformers.

P/S: Usage of Nanocrystalline / amorphous / Permalloy cores on Gen9 Level 3 ultra isolation power transformers

- Not for the moment. Although they are more efficient than HiB or standard cores, the long term mechanical stability and mechanical noise are still a problem for audio usage. For 400Hz power supplies, it should be fine, but for 50-60Hz in household electronics, Nanocrystalline or amorphous cores still have the above problem, that needs further enhancement to function properly in long term.

Check out our Facebook page for the raving reviews. You must not skip this if you want to maximize the potential of your system.  


J&K Audio Design
5/10/2017 
1/5/2020 (updated) 



No comments:

Post a Comment

Search This Blog

Product Lists

Product Lists

Level 0: link 1

Level 1: link 1, link 2, link 3, link 4

Level 2: link 1, link 2, link 3, link 4, link 5, link 6, link 7, Link 8, link 9

Level 3: depends on type, size and complexity. Email us for details.

Iso-trans: link 1, link 2

Power-trans: link 1

* Finished amplifiers, DACs, audio gadgets, upgrades and repairs - this is not our core business and we do it out of passion. We do not have fixed models, fixed price and we customize for each individuals. The sky is limit of creativity.

* Our product lines are always improving and increasing. If you do not see what you want, contact us!

* Please email for volume discounts, distributor and OEM pricing.